Index: linux-2.6.24/drivers/usb/host/ohci-s3c2410.c
===================================================================
--- linux-2.6.24.orig/drivers/usb/host/ohci-s3c2410.c	2008-02-15 18:24:53.000000000 +0100
+++ linux-2.6.24/drivers/usb/host/ohci-s3c2410.c	2008-02-15 18:25:21.000000000 +0100
@@ -24,6 +24,7 @@
 
 #include <asm/hardware.h>
 #include <asm/arch/usb-control.h>
+#include <asm/arch/regs-gpio.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
 
@@ -308,6 +309,40 @@
 	local_irq_restore(flags);
 }
 
+/* switching of USB pads */
+static ssize_t show_usb_mode(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	if (__raw_readl(S3C24XX_MISCCR) & S3C2410_MISCCR_USBHOST)
+		return sprintf(buf, "host\n");
+
+	return sprintf(buf, "device\n");
+}
+
+static ssize_t set_usb_mode(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	if (!strncmp(buf, "host", 4)) {
+		printk("s3c2410: changing usb to host\n");
+		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST,
+				      S3C2410_MISCCR_USBHOST);
+		/* FIXME:
+		 * - call machine-specific disable-pullup function i
+		 * - enable +Vbus (if hardware supports it)
+		 */
+		s3c2410_gpio_setpin(S3C2410_GPB9, 0);
+	} else if (!strncmp(buf, "device", 6)) {
+		printk("s3c2410: changing usb to device\n");
+		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB9, 1);
+	} else
+		printk("s3c2410: unknown mode\n");
+		return -EINVAL;
+	return count;
+}
+
+static DEVICE_ATTR(usb_mode, S_IRUGO | S_IWUSR, show_usb_mode, set_usb_mode);
+
 /* may be called without controller electrically present */
 /* may be called with controller, bus, and devices active */
 
@@ -325,6 +360,7 @@
 static void
 usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
 {
+	device_remove_file(&dev->dev, &dev_attr_usb_mode);
 	usb_remove_hcd(hcd);
 	s3c2410_stop_hc(dev);
 	iounmap(hcd->regs);
@@ -392,8 +428,15 @@
 	if (retval != 0)
 		goto err_ioremap;
 
+	retval = device_create_file(&dev->dev, &dev_attr_usb_mode);
+	if (retval != 0)
+		goto err_hcd;
+
 	return 0;
 
+ err_hcd:
+	usb_remove_hcd(hcd);
+
  err_ioremap:
 	s3c2410_stop_hc(dev);
 	iounmap(hcd->regs);